Expert Advice
FAST SHIPPING
OPEN 7 DAYS
Your bag is currently empty.
Rhythm Snowsports, 8 Sharp Street, Cooma NSW 2630
Summer Opening Hours
Retail & Hire
9am - 4pm daily
Service Station
7 am - 7pm (Midnight on Friday)
Winter Opening Hours
Open 24 hours (Subject to demand)
132 Sharp St, Cooma NSW 2630
Summer Opening Hours
Mon - Fri
9am - 4pm daily
Saturday
9 am - 1pm
Sun
Closed
Winter Opening Hours
Mon - Fri
9am - 4pm daily
Saturday
9 am - 1pm
Sun
Closed
16 Link Road, Smiggin Holes, Perisher Valley 2624
Summer Opening Hours
Closed for summer
Winter Opening Hours
Retail & Hire
7.30am - 5.30pm daily
June Long Weekend to September
The Smith Icon helmet brings elevated impact absorption and fit technology to every run.
This FIS-approved race helmet gives alpine ski racers the peace of mind to focus on reaching the podium with the angled impact benefits of MIPS plus the energy-absorption advantage of Koroyd throughout.
Match it to the Smith goggles of your choice for the best airflow and fog-free performance possible.
Fit/Integration:
FEATURES:
The answer is yes!
As the sport continues to progress and the equipment becoming more advanced, people are skiing faster and jumping higher in increasingly challenging terrains.
Helmets are now becoming more comfortable, warm, versitile and stylish.
Like apparel, the fit of your ski helmet is cruicial and personal.
A helmet needs to be comfortable enough to wear all day long, and the best fit will have no headache inducing pressure points.
Additionally a ski helmet offers protection from the cold and wind.
The fit directly affects comfort and the efficiancy of elemental protection.
Each manufacturer offers a sizing chart, in centimeters, based on head circumference just above the ears.
Asian Fit/ Round contour fit
Same as goggles we have Asian fit also known as Round Contour fit.
The helmet is rounder and flatter across the top of the head to fit certain ethnicities.
MIPS stands for multi-directional impact protection system.
It is a low-friction layer inside a snow helmet that allows a multi-directional movement of 10-15mm on certain angled impacts, intended to help reduce rotational force to the head.
Rotational motion is a common cause of concussion and more severe brain injury in oblique hits to the head
Hardshell/ Injection Mold
This is your "skateboard style helmet. These helmets use ABS (ACRYLONITRILE BUTAINENE STYRENE) a tough and impact resistant plastic bonded to the EPS foam.
It is a larger profile, heavier and can have less venting opportunities but is at a lower price point.
In-Mold
An in-mold helmet consists of a thin polycarbonate (A durable plastic with high impact resistance) shell filled uniformly and thoroughly with expanded polystyrene (EPS) a rigid and tough foam in a single process.
It is lighter in weight and lower profile than a hardshell helmet, more venting options meaning higher in price point.
Aside from a good fit, a helmet's compatibility with the goggles you'll be using is highly important.
You want you goggles to sit comfortably under your helmet, no pushing down on the nose and little to no gap between your helmet and the top of the goggle.
🏬 In-Store Pick-Up: FREE!
🛍️ Flat Rate: $10 | Australia Wide
📦 Bulky Items: $18.95 | Bulky items are over 100cm (W.A & N.T $40) (Bikes cannot be shipped)
🚚 Fast Delivery: Calculated at the checkout based on the weight and destination
💡 More information on shipping & carriers
At Rhythm Snowsports we want you to be stoked with your goods! That's why if you change your mind or choose the wrong size we will offer you a Refund, Exchange or Store Credit providing the following conditions are met
Refund; The item is returned within 14 days of receiving the item.
Exchange or Credit Note: The item is returned within 365 days of purchase
We can help you with the cost of the return or exchange label at an additional cost. For T&C's and information check out our Returns Page
14 days for refund or 365 for exchange!
Our Return Policy.
Order by 1pm and we ship that business day.
Our Shipping Policy.
