Sale

Spark RnD Dyno DH Splitboard Bindings

The Dyno DH splitboard binding is an acclaimed hardboot specific splitboard binding. It is designed to fit a variety of touring boots from different brands and delivers high-end performance to the growing hardboot segment of splitboarders. All parts are designed and manufactured by Spark RnD from start to finish for the all-around precision that you can only get from a Spark made product.

Dyno DH Bindings are for riding only. Carry them in your pack on the way up, while using your tech toes for touring. Then slide the Dynos on your pucks and lock into place with the snap ramps for the ride down. Fits boots with 255 - 340mm sole length.

Weight: 0.90 lb/ea (409g) – 1.80 lb/pr (818g)

Delivery

Get a delivery estimate

Calculate shipping rates

Your delivery

${ rate.service_name }: $${ Math.ceil(rate.total_price * 100) / 100 }

Order before 1pm daily for same day shipping

Orders are dispatched from our Cooma NSW store Mon - Fri

No shipping rates found.

Pick Up In Store

${drawerProduct.title}

${ drawerVariant.price | currencyFromCents } ~~${ drawerVariant.compare_at_price | currencyFromCents }~~

${ drawerVariant.price | currencyFromCents }

Rhythm Snowsports Cooma

Get Directions

02 6452 2303

8 Sharp Street, Cooma NSW 2630

Summer Opening Hours

Retail & Hire

9am - 4pm daily

Service Station

7am - 7pm (Midnight on Fridays)

Winter Opening Hours

Open 24hrs (Subject to demand)

Rhythm Pop-Up Shop

Get Directions

02 6452 2303

132 Sharp Street, Cooma NSW 2630

Summer Opening Hours

Mon - Fri

9am - 4pm daily

Saturday

9am - 1pm

Sun

Closed

Winter Opening Hours

Mon - Fri

9am - 4pm daily Saturday

Sun

Closed

Sale

Spark RnD Dyno DH Splitboard Bindings

The Dyno DH splitboard binding is an acclaimed hardboot specific splitboard binding. It is designed to fit a variety of touring boots from different brands and delivers high-end performance to the growing hardboot segment of splitboarders. All parts are designed and manufactured by Spark RnD from start to finish for the all-around precision that you can only get from a Spark made product.

Dyno DH Bindings are for riding only. Carry them in your pack on the way up, while using your tech toes for touring. Then slide the Dynos on your pucks and lock into place with the snap ramps for the ride down. Fits boots with 255 - 340mm sole length.

Weight: 0.90 lb/ea (409g) – 1.80 lb/pr (818g)

Product Info

Features	Features Toe Clips The toe clip is designed to fit even low profile AT boots. The slim design saves weight while maintaining backcountry dependability. Set Screw The set screw has a 4mm hex drive, found on our Spark Tool. Lightweight & Strong Stainless steel bails and anodized aluminum toe clips. The heel end of the baseplate has been reinforced to avoid bending with heavy use. Snap Ramps Tesla System Snap Ramps for speedy, pinless transitions.
Target Gender	Target Gender Unisex. This product is designed without a gender fit in mind.
Product Weight	Product Weight Weight: 0.90 lb/ea (409g) – 1.80 lb/pr (818g)

Buying Guide

Reviews

From machining and anodizing to laser engraving and assembly, Spark's skilled team—passionate splitboarders themselves—handles it all in-house. This enables rapid product evolution and the flexibility to serve niche splitboarding markets.

Shop all Spark RnD